Maintenance of professional cardboard production line

1. When steam is heated, the pipeline should be unblocked, and the steam pressure should reach 8~9kg/cm2, so that the surface temperature can reach above the bondability; If the temperature difference between the two sides of the corrugated roller is more than 4~5℃, check whether the heating equipment such as siphon is normal.Carry out regular maintenance on corrugated rollers, pressure rollers, coating rollers and leveling rollers of corrugated board production line, and clean and remove carbonized paper scraps, adhesives and other sundries on roller surfaces.3. Regularly clean the grooves on the surface of the corrugated roller to remove the sundries and dust remaining in the grooves; Always check and thoroughly clean it once a week.4 If the machine is stopped, the adhesive in the rubber box, rubber isolation plate and other places must be cleaned, so as to avoid the dry adhesive affecting the adjustment of the gluing width in the next production.5. Always refuel the pneumatic triplex of corrugated board production line and remove the filtered water.6 lubrication. Regularly check the lubrication condition of the notice posted with "Refueling" prompt, and make up the note immediately once found.